2016 KUBOTA SVL95-2S - 4 In 1 Bucket And Forks - 885hrs - 500mi Free Delivery

885 hours.
Excellent machine that has been well taken care of.
Not a rental or abused by carless operators.
High flow never used.
All services done on time and inside cleaned out.
Religiously greased.
Air filter cleaned often.
Never any leaks anywhere.
Tracks are in decent shape.
Welded on trailer receiver hitch.
Zero issues.
Ready to work.
Only issue ever had was last year with the DEF system and dealer replaced the entire system under warranty. Tank, bulkhead, heater, pump, injector, control module etc. Have only put platinum DEF in after.
They also upgraded the intercooler ducting and intake snorkel. Also
installed the startup timer to the gauges like the new ones. So it’s basically like the current machine.
Comes with Kubota 4 in 1 bucket and forks.
Also available:
Trailer is 2016 Trail Max T-16-UT
4’ in front of tilt section
2 new tires
18,000 lb gross
Will deliver in a 500 mi (maybe more) radius from Yorkville CA 95494
Please contact me with any questions.
9707087297
Specifications
General
Manufacturer
Kubota
Category
Loaders
Subcategory
Compact Track Loaders
Model
SVL95-2S
Dimensions
Height
83.3 in. (2,116 mm)
Width
77.2 in. (1,962 mm)
Weight
11,299 lbs. (5,125 kg) open cab 11,574 lbs. closed cab
Ground Clearance
11.5 in. (293 mm)
Turning Radius
127 in. (3,220 mm) from center-machine rear
Drivetrain
Tracks
Length: 65.6 in. (1,667 mm) Standard Width: 17.7 in. (450 mm) Gauge: 59.5 in. (1,512 in.)
Engine
Engine Model
V3800-TIEF4
Cylinders
4
Gross Horsepower
96.4 hp (71.9 kW) @ 2,400 rpm
Net Horsepower
95 hp (70.8 kw) @ 2,400 rpm
Displacement
230 ci
Fuel Tank Capacity
28.8 gal. (109 l)
Rated Speed
Low: 5 mph (8 km/h)High: 7.3 mph (11.7 km/h)
Hydraulics
Hydraulic Tank Capacity
10.1 gal. (38.1 l)
Operational
Tipping Load
9,143 lbs. (4,147 kg)
Dump Reach
40.7 in. (1,035 mm)
Dump Angle
43°
Bucket Breakout Force
7,961 lbf. (3,611 kg)
Bucket Rollback
27° at carry position
Lifting Force
4,766 lbf. (2,162 kg)
Trailer:
Dimensions
Dimensions
Crossmembers: 3" Tubular Crossmembers on 16" Centers / Decking: 2" rough surface No. 1 grade Fir with fasteners at all crossmembers
Hitch Ball Size
2-5/16" ball coupler, adjustable
Width
Deck: 82.5" between fenders
Chain Width
2 each 3/8" x 36" Grade 70 high test cadmium plated with slip hooks and safety latches
Capacities
Cargo Capacity
13,820 lbs.
Axle Count
2 each 8,000 lb. capacity
Gears
10,000 lb. capacity with drop foot
Weights
GVWR
18,000 lbs.
Weight
4,180 lbs.
Chassis
Frame Type
Tubular subframe with high tensile perimeter rails
Wheels & Tires
Wheels
17.5" x 6.75" 8 hole disc type 6.5 bolt circle
Tires, Rear Specification
215/75R 17.5 radial load range H
Suspension
Suspension
Rubber torsion
Brakes
Hub Type
8 on 6.5 bolt circle with 5/8" cone type lug nuts
Brake System Type
12-1/4" x 2" electric brakes both axles with 12 volt sealed breakaway system
Electric
Electrical
Trucklite modular system with rubber isolated, LED lighting
Features
Features
Deck latch: Over-center type with tension adjustment and safety pin / Tool Compartment: Combination open tool tray and lockable toolbox / Cushion Cylinder: 3" x 12" with internal metered flow to cushion loading and unloading / Load Securement: 12 each (6 per side) 1″ D-ring type, 12 each (6 per side) stake pocket / Finish Preparation: 5 stage Acid pre-treatment wash with Phosphate & Sealer / Base coating: Two-component epoxy primer sealer / Finish Coating: Two-component urethane enamel top coat