1911 ARMORERS BLOCK – BLACK GLASS FIBER REINFORCED NYLON 10-8 PERFORMANCE USA

Description

...............
1911 ARMORERS BLOCK FIXTURE– BLACK GLASS FIBER REINFORCED NYLON 10-8 PERFORMANCE
This handy bench block / fixture is machined from super-tough, glass reinforced black nylon. It supports 1911 pistol components so you can perform a variety of repair, assembly / disassembly, and accurizing tasks quickly and easily. Securely holds the frame on its side, so you can work on it without risk of damaging the finish. Helps you check hammer / sear engagement, remove hammer strut pin, remove the mainspring housing, and holds thumb safety for easy filing of the sear stop stud engagement surface. Use to tension the extractor off the slide, so you don’t risk scratching the slide, and retain the extractor while filing and honing the claw. Holds the barrel during link pin removal, with blind holes to catch the pins so they don’t get lost. You can even place the frame between two blocks (two must be purchased) and clamp it in a bench vise for slide fitting.
Whatever you might wish to do to your 1911 using hand tools, this block will help you do it. The block comes with hammer and sear fixture pins.
extractor tensioning
extractor claw profiling
holding the frame flat
2 blocks can hold the frame for slide/frame fitting (optional when 2 blocks are purchased)
hold the barrel for link removal/installation
hammer/sear pin fixture, included
mainspring housing assembly/disassembly
thumb safety fitting
This block is so handy and well designed that it is used by Colt® in their 1911 armorer courses!
!!! Made In USA !!!
!!! Makes A Great Gift !!!